U-MIC-H User Manual
Operation
The U-MIC receiver is designed to connect to a microphone input channel on a
mixer or amplifier. Turn down the volume level on the microphone input of the
mixer or amplifier before connecting to avoid loud noises when connecting.
Connect the 3.5mm plug end of the supplied lead to the U-MIC receiver (5) and
the 6.3mm plug into an appropriate microphone input channel.
The handheld transmitter has an on/off switch (2), which should be in the down
position (off).
Unscrew the bottom cover of the battery compartment (3) and insert 2 x AA
alkaline batteries, ensuring that the polarity is the correct way around.
Move the switch up to the “on” position and the power
indicator (1) should light
briefly. If this LED is lit constantly, this indicates that the batteries are low on
charge and need replacing with new ones.
Gradually turn up the volume control on top of the transmitter and the level on
the mixer or amplifier and speak into the neckband microphone until the sound
can be heard through the connected speakers or recording equipment.
Increase the volume to the required level.
If the microphone is not being used, turn down the volume level on the
mixer/amplifier and switch the power off.
For long term storage, unplug the jack and USB receiver and remove the
batteries from the handheld transmitter.
