171.801UK User Manual
Product layout
Receiver
1.
POWER LED
–
illuminated when power to receiver is on
2.
RF LED
–
illuminated when receiver detects RF carrier signal
3.
AUDIO PEAK LED
–
illuminates to indicate audio reaching peak level
4.
VOLUME
–
rotate clockwise to increase output level
5.
ANTENNA
–
fold-away VHF telescopic aerial
6.
OUTPUT
–
6.3mm jack unbalanced audio output
7.
CASE
–
sturdy plastic receiver housing
8.
DC INPUT
–
2.1mm power connector for 9-15Vdc input
Transmitter
1.
GRILLE
–
windshield with integral pop filter
2.
LOW BATT LED
–
illuminates when battery charge is low
3.
POWER LED
–
illuminates to show battery power is on
4.
POWER & MUTE
–
switches to activate battery and mute output
5.
GAIN
–
screw adjustment inside battery compartment to adjust mic gain
6.
COVER
–
screw-on cover for battery compartment
Operation
With levels turned down, connect a 6.3mm jack lead from the receiver to the P.A. system
or mixer and extend the antenna vertical to the receiver unit.
On the handheld transmitter, with the POWER switch off, unscrew the battery cover and
connect a good 9V (PP3) battery
to the contacts, taking note that the “+” and “
-
”
connections are correct.
