11. Rec:
Button that, when pressed, will record-enable the Tri-ger. When it is held down, it will
allow the user to punch in record. (See
Getting Started: Recording New Loops,
Punch In/Punch Out Recording
, and
Momentary Punch In Recording
for more
information).
12. Alt:
Alternate
button that, when pressed, gives the Tri-ger's LED buttons a secondary and
tertiary function.
Alt + Play/Pause =
Trigger 1
Alt + Retrigger
=
Trigger 2
Alt + Roll
=
Trigger 3
13. Rec/Mute Indicators:
LED indicators that show the current state of specific channels (See
Getting Started:
Muting Specific Channels
and
Enabling/Disabling Drum Rolls On Specific
Channels
for more information).
14. Bar/Beat Indicators:
LED indicators that show the current location within a recorded loop. These indicators
assume that the recorded pattern is in the 4/4 time signature.
Banks
To access the Tri-ger's 8 banks, hold down the
alt
and
rec
buttons
until all
bar/beat
indicators
illuminate. Release buttons and a single
bar/beat indicator
will blink,
showing which bank is currently active.
The
alt button
will cycle through each bank in numerical order.
The
rec button
will load the highlighted bank and exit the bank menu.
The
play/pause
button will exit the bank menu without loading a new bank.
If the
rec/mute indicators
are red when a bank is highlighted, the bank is full.
If the
rec/mute indicators
are green when a bank is highlighted, the bank is empty.
All empty banks will load the currently recorded pattern upon selection.
Each bank can be rewritten with entirely new patterns of different lengths.
9