Quadra byke QUAD-TRIKE-BIKE, Owner'S Handbook Manual

1 Wheel Front and Rear

2 Rear Wheels

8

5

L

L  Long Axle Rear for Four wheels Format

Black Nut and Washer for each side

M

M

 M    Medium  Axle Assembly for One wheel front and rear

Lock Nuts and Washers

Spacer

1. Place the spacer as show

1. Place wheel between bearings 

as shown. 

2. Insert Medium Axle through 

wheel bearings and wheel 

3. Place washer onto axle

4. Thread Black Lock Nut onto 

axle and ensure it is fully tighten 

and secure

6. Thread Black Lock Nut onto 

axle and ensure it is fully tighten 

and secure

NB. 

Now repeat the process for the front axle. 

Always check that all Black Lock Nuts are tight 

and secure before use

5. Now on the opposite side, 

place a washer onto the axle

2. Insert axle marked ‘L’ passing 

through wheel bearings and 

spacer

4. Place washer onto axle as 

shown

6. Ensure that Black Locknut is 

fully tigthen and secure

7. Place wheel on the opposite 

end of axle

7. Place washer onto axle

8. Thread Black Lock Nut onto 

axle and ensure that it is fully 

tighten and secure

5. Thread Black Lock Nut onto 

axle

3. Place wheel onto axle

Items Required 

Items Required