background image

Page  2

7075-205B

October 12, 2015

Voyageur Grand

Hearth & Home Technologies welcomes you to our tradition 
of excellence!  In choosing a Quadra-Fire appliance, you 
have our assurance of commitment to quality, durability, and 
performance.

This commitment begins with our research of the market, 
including ‘Voice of the Customer’ contacts, ensuring we 
make products that will satisfy your needs. Our Research 
and Development facility then employs the world’s most 
advanced technology to achieve the optimum operation of 

our stoves, inserts and fi replaces.  And yet we are old-fash-
ioned when it comes to craftsmanship.  Each unit is meticu-
lously fabricated and surfaces are hand-fi nished for lasting 
beauty and enjoyment.  Our pledge to quality is completed 
as each model undergoes a quality control inspection.    

We wish you and your family many years of enjoyment in 
the warmth and comfort of your hearth appliance.  Thank 
you for choosing Quadra-Fire.

and Welcome to the Quadra-Fire Family

!

VOYAGEUR GRAND

Serial No.

007057

U.S. ENVIRONMENTAL PROTECTION AGENCY 

- Export stove. May not be operated within the United States

DO NOT REMOVE THIS LABEL

 

Mfg by: 

1445 N. Highway, Colville, WA  99114     www.quadrafire.com

Made in U.S.A. of US and 

imported parts.

7075-206

JAN FEB MAR APR MAY JUN

JUL AUG SEP OCT NOV DEC

2013 2014 2015

This appliance has been TESTED TO AS/NZS4013 for 

Hardwood by VIPAC LTD. 

Report # 30A-13-0025-TRP-331382-0 

Date tested: March 2013

VOYAGEUR GRAND INSERT

R

OVERALL AVERAGE EFFICIENCY BURNING HARD-

WOOD

  (WHEN TESTED IN ACCORDANCE TO AS/NZS 4012)

62.8%

AVERAGE PARTICULATE EMISSION FACTOR BURN-

ING HARDWOOD

(WHEN TESTED IN ACCORDANCE  TO AS/NZS 4013)

2.0 g/kg

MAXIMUM AVERAGE HEAT OUTPUT BURNING 

HARDWOOD

9.3 kw

APPROVED FUEL

BURN ONLY HARDWOOD WITH A MOISTURE CON-

TENT LESS THAN 25% (dry basis).

WETBACK - ALL MODELS

MANUFACTURED BY

Wetbacks are NOT an approved option and must 

not be fitted.

NOTE: Performance may vary from test values 

depending on actual operating conditions.

INSTALLATION DATE

Summary of Contents for GRAND-MBK-AU









































Reviews: