20
7014-285A
October 9, 2017
CB1200 Pellet Insert
4. Install the left shroud panel corner; 2 screws into
back of hopper and 1 screw down into the filler piece
(Figure 20.1)
.
2 screws into
back of hopper
1 screw down
into filler piece
Figure 20.1
5. Install the Rear Panel using six screws
(Figure 20.2)
.
Figure 20.2
7. Attach the left shroud panel using eight screws
(Figure 20.4)
.
6. Install the cover plate over the top vent opening
using 4 screws
(Figure 20.3)
.
Figure 20.3
Figure 20.4
6 screws to attach
rear panel
8 screws to attach
left shroud panel
8. Assemble the right shroud panel corner and the right
shroud panel using 3 screws
(Figure 20.5)
.
9. Attach the right panel assembly using 4 screws to
appliance
(Figure 20.6)
.
Figure 20.5
Figure 20.6
3 screws to attach right shroud
panel to right shroud corner piece
5 screws to attach
right shroud panel
11. Using the electric drill with #26 drill; bit drill 2 holes
into the back of the hopper. Add two screws to secure
shroud assembly to the appliance
(Figure 20.8)
.
Drill these 2
holes
Figure 20.8
10. Using the electric drill with #26 drill; bit drill 3 holes
into the hopper. Add three screws to secure shroud
assembly to the appliance
(Figure 20.7)
.
Figure 20.7
Drill these 3
holes
