background image

 1 

 

 

 

 

                       7080-166B 

 

 

 

 

   April 18, 2018

TREKKER FREE STANDING PELLET 

APPLIANCE

Model(s):

TREKKER-CSB            TREKKER-MBK

TREKKER-PBK             TREKKER-PDB     

TREKKER-PFT             TREKKER-PMH

Owner’s Manual

Operation & Care

INSTALLER: Leave this manual with party responsible for use and operation. 

OWNER: Retain this manual for future reference. 

Contact your dealer with questions regarding installation, operation or service. 

 

HOT SURFACES! 

 

Glass and other surfaces are hot  

 

during operation AND cool down.  

Hot glass will cause burns.

• 

Do not touch glass until it is cooled

• 

NEVER allow children to touch glass

• 

Keep children away

• 

CAREFULLY SUPERVISE children in same room as 

fireplace.

• 

Alert children and adults to hazards of high temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

• 

Keep  clothing,  furniture,  draperies  and  other  flammable 

materials away.

 WARNING

Please read this entire manual 

before use of this pellet fuel-burning 

room heater. Failure to follow these 

instructions could result in property 

damage, bodily injury, or death.

 

•  Do not store or use gasoline or other flam

-

mable vapors and liquids in the vicinity of 

this or any other appliance.

•  Do NOT burn garbage or flammable fluids 

such as gasoline, naphtha, or engine oil in 

room heater. 

•  Do not over fire - If heater or chimney con

-

nector glows, you are over firing. Over firing 

will void your warranty.

•  Comply with all minimum clearances to 

combustibles as specified.  Failure to 

comply may cause house fire.

WARNING

CAUTION

Tested and approved for wood pellets only. Burning of 

any other type of fuel voids your warranty. 

NOTE

To obtain a French translation of this manual, please contact 

your dealer or visit www.quadrafire.com

00

Pour obtenir une traduction française de ce manuel, s’il vous 

plaît contacter votre revendeur ou visitez www.quadrafire.com

CAUTION

Check building codes prior to installation.

•  Installation MUST comply with local, regional, state and na-

tional codes and regulations.

•  Consult local building, fire officials or authorities having juris

-

diction about restrictions, installation inspection, and permits.

Installation and service of this appliance should be performed by 

qualified personnel. Hearth & Home Technologies recommends 

HHT Factory Trained or NFI certified professionals.

Summary of Contents for TREKKER-CSB





































Reviews: