3
YOU MUST REMOVE ANY FACTORY INSTALLED “ROCK RAILS”,
SIDE STEPS OR RUNNING BOARDS BEFORE INSTALLATION OF
YOUR NEW SIDE STEPS.
PARTS LIST:
Driver (Left) Side Step
QTY 1
Passenger (Right) Side Step
QTY 1
A) M8 x 25 mm Hex Bolts
QTY 18
B) 8mm Flat Washers
QTY 30
C) 8mm Lock Washers
QTY 6
D) 8mm nylock nut
QTY 12
Required Tools:
Safety Glasses
13mm Socket with Ratchet Driver
13mm Wrench
A
C
B
D
Installation Hardware:
Put on safety glasses. Starting with the
passenger side, locate the 6 holes along
the factory pinch weld of your vehicle
as shown. (FIG 1)
Starting at the front of the vehicle,
position the mounting tabs of the side
steps and align the holes with the fac-
tory pinch weld holes as shown. (FIG 2)
Brute Strength Side Steps Installation:
FIG 1
FIG 2
BRUTE_SIDE_STEPS_JL4_12057_0271_A4.qxp_A4 2/26/20 5:20 PM Page 3
