16
STEP 2: DROP ROPE ATTACHMENT TO ORGANIZER/PULLEYS AND WEBBING STRAPS
B. Attach black drop ropes to webbing straps. A figure 8 follow through knot will be used to secure drop rope to
webbing loop. Following diagram below shows proper proceedure (steps 1-8). Place figure 8 knot as close to
webbing as possible. Cinch all four drop ropes ends exiting knot.
C. Unbuckle webbing straps. Run straps inside and out
of the hardtop as shown. Two figure 8 knots are to be
located at the upper door corner and two at the upper
top corners of the liftgate window. Lock buckle
straps. Adjust stap lengths as needed to insure level
lifting of the hardtop.
Summary of Contents for Quadratop 12020-2000
Page 20: ...Instructions Part 12999 3307...
