background image

Important: Existing soft top hardware
required to install this top. Check to
make sure your hardware looks like
the picture to the left.

The Trusted Source

®

2

Before You Begin Soft Top Installation:

Congratulations on your purchase of the
QuadraTop! This high quality soft top is 
designed to provide years of protection
from whatever nature can throw at you!
We have used only the finest materials
in creating this soft top but like any
product that is exposed to the elements,
there is some general maintenance that
is required to keep your QuadraTop
looking like new. Please see page 14
for these important maintenance tips as
well as page 15 for available hardware
components that may have been lost or
worn over the years.

Thank you again for your purchase and
let’s start the installation process!

When unpacking, check to make sure all
parts are included. If any part is missing 
or broken, please call Quadratec 
Customer Service at 800-745-6037
as soon as possible.

Important: Make sure you become
familiar with the installation process
of this top by reading the following
instruction sheet thoroughly. 

Important Safety Information: 

Your QuadraTop

®

soft top is intended

to increase the utility and enjoyment of
your off-road capable vehicle. Before
installation, please take a moment to
review the following safety information 

and installation instructions. Important
safety information is generally preceded
by one of three signal words indicating
the relative risk of injury.
The signal words mean:

a hazardous situation which, if not avoided, could result in death or
serious injury. You CAN be KILLED or SERIOUSLY HURT if you don’t
follow instructions.

a hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you don’t follow instructions. 

Careful attention is required to this instruction or operation but does
generally not relate to personal injury. Damage to your Quadratec

®

product or other property may result if you don’t follow instructions. 

This product is designed to fit over your original factory soft top
hardware. Please see the image below to make sure you have the
complete and correct hardware for this top.

JK_07-18_LTR_PRINT_JJ.qxp_Layout 1  4/5/18  12:32 PM  Page 2

04052018123309

Summary of Contents for QuadraTop

















Reviews: