Greasing the moving parts
2
1
ASSEMBLAGE
20
LUBRICATION POINTS
Grease lubrication points using grease containing lithium soap.
1. Grease fitting (A) of the front mounting tube.
Remove and grease shaft (B).
2. Remove bolt (C) and disk (D) and then remove the rear frame swivel
(E) and lubricate the shaft of the impact absorption frame (F).
Loctite
Safety bolt
M6 x 115
Replacing the safety bolt.
The frame is equipped with a shock absorption system that reduces the risk of damage
that could be caused to the ATV / UTV.
If you hit a foreign object or ice, the safety bolt is designed to break upon absorbing
impact and the frame to collapses to the ground.
This is designed to avoid damaging the parts or components of the ATV.
Replace only with original parts.
The use of any other bolt may void the warranty.
Note : Safery bolts are to be considered as a preventive measure not as an
assured protection, any damages resulting from the lack of safety bolts breakage
are not covered.
B
A
C
D
F
E
MAINTENANCE
