9
General description of
UV1316:
The UV1316 tuner belongs to the UV 1300 family of tuners, which are designed to meet a wide range of applications.
It is a combined VHF, UHF tuner suitable for CCIR systems B/G, H, L, L, I and I. The low IF output impedance has been designed
for direct drive of a wide variety of SAW filters with sufficient suppression of triple transient.
Features of UV1316:
n
Member of the UV1300 family small sized UHF/VHF tuners
n
Systems CCIR: B/G, H, L, L, I and I; OIRT: D/K
n
Digitally controlled (PLL) tuning via IýC-bus
n
Off-air channels, S-cable channels and Hyperband
n
World standardized mechanical dimensions and world standard pinning
n
Compact size
n
Complies to CENELEC EN55020 and EN55013
PINNING
PIN VALUE
1. Gain control voltage (AGC)
: 4.0V, Max:4.5V
2. Tuning voltage
3. I²C-bus address select
: Max:5.5V
4. I²C-bus serial clock
: Min:-0.3V, Max:5.5V
5. I²C-bus serial data
: Min:-0.3V, Max:5.5V
6. Not connected
7. PLL supply voltage
: 5.0V, Min:4.75V, Max:5.5V
8. ADC input
9. Tuner supply voltage
: 33V, Min:30V, Max:35V
10. Symmetrical IF output 1
11. Symmetrical IF output 2
General description of
UV1336:
UV1336 series is developed for reception of channels broadcast in accordance with the M, N standard. The tuning is available
through built-in digitally controlled IýC bus (PLL).
Features of UV1336:
n
Global standard pinning
n
Integrated Mixer-Oscillator&PLL function
n
Conforms to CISPR 13, FCC and DOC (Canada) regulations
n
Low power consumption
n
Both Phono connector and F connector are available
PINNING
PIN VALUE
1. Gain control voltage
: 4.0V, Max:4.5V
2. Tuning voltage
3. Address select
: Max:5.5V
4. Serial clock
: Min:-0.3V, Max:5.5V
5. Serial data
: Min:-0.3V, Max:5.5V
6. Not connected
7. Supply voltage
: 5.0V, Min:4.75V, Max:5.5V
8. ADC input (optional)
9. Tuning supply voltage
: 33V, Min:30V, Max:35V
10. Ground
11. IF output
TEA6415C:
General Description:
The main function of the TEA6415C is to switch 8 video input sources on the 6 outputs.
Each output can be switched to only one of the inputs whereas but any same input may be connected to several outputs.
All switching possibilities are controlled through the IýC-bus.
Features:
n
20 MHz Bandwith
n
Cascadable with another TEA6415C (Internal address can be changed by pin 7 voltage)
n
8 inputs (CVBS, RGB, Mac, CHROMA, )
n
6 Outputs
n
Possibility of MAC or chroma signal for each input by switching-off the clamp with an external resistor bridge
n
Bus controlled
n
6.5dB gain between any input and output
n
-55dB crosstaljk at 5MHz
n
Fully ESD protected
PINNING
PIN VALUE
1. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
2. Data
: Low level : -0.3V Max:1.5V, High level : 3.0V Max : Vcc+0.5V
3. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
4. Clock
: Low level : -0.3V Max:1.5V, High level : 3.0V Max : Vcc+0.5V
5. Input
: Max
: 2Vpp, Input Current
: 1mA, Max : 3mA
