13
MC44604
General description:
The MC44604 is an enhanced high performance controller that is specifically designed for off-line and DC-to-OC converter
applications. In fact , the MC44604 is an evalution of the MC44603 and enables the sama working in normal mode. So, it offers a
really safe and reliable power management thanks particulary to its protection features (foldback, overvoltage detection, soft start
accurate demagnetization detection). Its high current totem pole output is also ideally suited for driving a power MOSFET but can
be used for driving a bipolar transistor in low power converters ( < 150 W).
In addition to these MC44603 features, the MC44605 features a new efficient way to reduce the stand-by power, indeed, the
circuit is able to detect transitions between stand-by and normal mode, and to control a patented stand-by burst mode working of the
converter enabling to significantly reduce the converter consumption in stand-by mode.
Features
n
Operation up to 250 kHZ Output Switching Frequency
n
Inherent Feed Forward Compensation
n
Latching PWM for Cycle-by-Cycle Current Limiting
n
Oscillator with Precise Frequency Control
n
Externally Programmable Reference Current
n
Secondary or Primary Sensing
n
High Current Totem Pole Output
n
Overvoltage Lockout with Hysteresis
n
Overvoltage Protection Facility against Open Loop
n
Protection against Short Circuit on Oscillator Pin
n
Fully Programmable Foldback
n
Soft-Start Feature
n
Accurate max Duty Cycle Setting
n
Demagnetization (Zero Current Detection) Protection
n
Internally Trimmed Referance
n
Low Start-Up and Operating Current
n
Patented Stand-by Burst Mode for low stand-by losses
n
Low dV/dT for Low EMI radiations
PINNING
1. Positive suppy voltage
2. Output high state voltage
3. Output
4. Ground
5. Foldback input
6. Overvoltage Protection
7. Current sense input
8. Demagnetization detection
9. Stand-by current set
10. Oscillator frequency set
11. Soft-Start / Dmax / voltage - mode
12. Clamp error amplifier input
13. E / A Out (Error amplifier output)
14. Voltage Feedback
15. Stand-by management
16. Internal Reference current
SDA5555
General description:
The SDA 5555 is a single chip teletext decoder for decoding World System Teletext data as well as Video Programming System
(VPS), Program Delivery Control (PDC), and Wide Screen Signalling (WSS) data used for PAL plus transmissions (line 23).
The device also supports Closed caption acquisition and decoding. The device provides an integrated general-purpose, fully
8051-compatible Microcontroller with television specific hardware features. Microcontroller has been enhanced to provide powerful
features such as memory banking, data pointers and additional interrupts etc. Device has an internal ROM of 128 KBytes, and an
Internal XRAM consists of 16 KBytes. The SDA 5555 supports a wide range of standards including PAL, NTSC and contains a
digital slicer for VPS, WSS, PDC, TTX and Closed Caption, an accelerating acquisition hardware module, a display generator for
Level 1.5 TTX data and powerful On screen Display capabilities based on parallel attributes, and Pixel oriented characters
(DRCS). The 8-bit Microcontroller runs at 360 ns. cycle time(min.). Controller with dedicated hardware does most of the internal
TTX acquisition processing, transfers data to/from external memory interface and receives/transmits data via I 2 C-firmware
user-interface. The slicer combined with dedicated hardware stores TTX data in a VBI buffer of 1 Kilobyte. The Microcontroller
firmware performs all the acquisition tasks (hamming- and parity-checks, page search and evaluation of header control bits)
once per field. Additionally, the firmware can provide high-end Teletext-features like Packet-26-handling, FLOF, TOP
and list-pages. The interface to user software is optimized for minimal overhead.
SDA 5555 is realized in 0.25 micron technology with 2.5V supply voltage and 3.3V I/O (TTL compatible).
