background image

ENGLISH

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

Dripping warning:" The product shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be placed on the
product."

Ventilation warning: " The normal ventilation of the product shall not be impeded
for intended use."

Note: Minimum distances around the apparatus for sufficient ventilations. The
use of apparatus in tropical and/or moderate climates.

Dispose of old barreries safely.

Do not throw them into a fire.

CLASS 1 LASER

PRODUCT

Class 1 laser product.

LASER SAFETY

“CAUTION:

DANGER:

CAUTION:

This unit employs laser. Only a
qualified service person should
remove the cover or attempt to service
this device, due to possible eye injury.

Use of controls or

adjustments or performance of
procedure other than specified herein
may result in hazardous radiation
exposure.”

Invisible laser radiatio

when open and interlock failed or
defeated avoid direct exposure to
beam.

Hazardous

laser radiation when open
and interlock defeated.

Summary of Contents for MC-355 USB



















Reviews: