QuadroTech LTD
4
4. Please follow this link to get know how to
connect your device to the QuadroBase
controller.
RESETTING
You can reset and delete all paired devices by
following these steps:
1. Press and hold the on/off button on the
Socket for 10 seconds. The LED indicator
will start flash quickly.
2. Release the on/off button for 1 second and
press again to confirm the reset.
Note: after a reset, a new pairing with the
QuadroBase v.1.0 controller is required.
PROGRAMMING
The following steps should be executed to
programming the Socket:
1. Press and hold the on/off button on the
socket for 3 seconds. The LED indicator will
start flash.
2. Release the on/off button Press and press
“Socket ON” button at the remote control.
3. Press the on/off button on the socket for
again to confirm the programming. After
that the “Socket OFF” code shold be added
automatically.
4.
Verify the “Socket ON” and “Socket OFF”
buttons for the Socket control.
Mobile application
Use the Quadrobit Smart Home mobile
application for your convenience.
NOTE. The Quadrobit Smart Home app. for
Android can be downloaded free from Google
Play Market. Also you can download the *.apk
file for the Quadrobit Smart Home app. installing
if access to Google Play Market is blocked. In
this case the permission to install applications
from unknown sources must be turned on at
your device.
Scan the same QR-code to quick connect the
Socket to your QuadroBase v.1.0 Smart Home
Controller using the installed Quadrobit Smart
Home mobile application.
Features
Use the
Smart Home mobile application for remote
access to the Socket.
Troubleshooting
In most cases, the malfunction of the Socket
may be due to its improper usage. Read current
User Manual carefully before using the Socket.
Contact
the
official
support
service
of
QuadroTech LTD in the event of a malfunction.
It is forbidden to disassemble, repair or upgrade
the Socket.
FAQ
Q.:
The device doesn’t turn on.
A.:
Make sure the AC power cord is securely
plugged into an AC power outlet.
Unplug the unit for a moment, and then plug it
back in again. Check the socket by plugging in
another device.
Q.:
The socket doesn’t turns on/off.
A.:
Stand closer to the receiver, the range
should be up to 50 m. Check the socket by
plugging in another device. Doors or Walls will
reduce the remote distance.
