Step 10 If the order point is physically too small to house the DTM OR if the ambient temperature
in the order point might exceed 40°C (104°F) on a regular basis, the DTM can be located internally.
In doing so you will need to cut and remake the speaker and microphone connections using the
Junction Boxes (Q-P9JB) - ordered separately. See Appendix B for this procedure.
Step 11 Choose a location to mount the base
station with as much clear space around it
to optimize the transmission range. Use the
template to locate the fixing holes. The power
supply should be close by.
Step 12 If there is a lane timer and/or a chime speaker to be connected to the system, the cables for
both need to be fed into an Auxiliary Connection Box (Q-P9ACB) which connects into the base station.
When completed, plug in the DIN plug into the base station and use the length of cable to mount the
auxiliary connection box out of sight in the ceiling or under a counter.
page 6
Figure 6 - Positioning the base station
Figure 7 - Connecting lane timer/chime speaker to the system
