STEP 1
•
The base station can be located in
either the OR or the monitoring room.
•
Identify a location with clear space
around it and nothing in front (the
base is a transmitter).
(figure 1)
•
You need a power socket close by.
Connect the Q-PSU48 power supply
into the wall socket and then into the
socket in the top of the base.
•
The base should be fitted to the wall
using the two velcro strips supplied,
peeling back the protective covers.
Do not fit the base to the wall upside
down or sideways.
•
When the power is connected, the
LED on the front will start AMBER during
booting up, then go GREEN after 30
secs.
figure 1
Useful information
• If you have multiple ORs and multiple Pro11 systems, you can move headsets
from one room to another by following Step 4. When a headset is registered to
another base station, it automatically deregisters from the previous one.
• If you hear 2 beeps in your ear, it means you’ve gone out of range. Move back
towards the base station it’s registered to and the headset will reconnect.
