11
10
Customer Helpline
0845 034 2279
www.gardenservicecentre.co.uk
Customer Helpline
0845 034 2279
www.gardenservicecentre.co.uk
Operating the Blower
Step 2 - Blowing
Blowing
1). Before blowing,loosen leaves that are stuck to the ground using a broom or rake.
2). Hold the tube approximately 10cm above the ground and walk slowly forward using a
sweeping motion from side to side.
3).Direct the air stream away from yourself.
4).Ensure that you do not to stir up any heavy objects and hurt somebody or damage something.
Maintenance and Repair
Maintenance and Repair
Transportation
1). Switch the product off and disconnect the battery pack from the appliance before transporting
it anywhere.
2). Always carry the product on its gripping surfaces.
3). Protect the product from any heavy impact or strong vibrations which may occur during
transportation in vehicles.
WARNING!
Always switch the product off, disconnect it from the battery pack and let the product
cool down before performing inspection, maintenance and cleaning work!
General
1). Clean the product with a slightly damp cloth and pH-neutral soap.
2). In particular clean the air vents after every use with a cloth and brush.
3). Remove stubborn dirt with high pressure air (max. 3 bar).
4). Check for worn or damaged parts. Replace worn parts as necessary or contact an authorized
service centre for repair before using the product again.
5). Regularly check for obvious defects such as loose, dislodged or damaged cutting device,
loose fixings and worn or damaged components.
6). Check that covers are undamaged and correctly fitted. Carry out necessary maintenance or
repairs before using the product.
7).This product does not contain any parts that can be repaired by the consumer. Contact a
qualified specialist to have it checked and repaired.
Storage and Transportation
Storage
1). To prolong battery life, recommend to charge the battery every 2 months, which over
extended periods of time without use.
2). Clean the product as described above.
3). Disconnect the battery pack from the tool firstly ,then store the tool and battery pack
individually in a dark, dry, frost-free, well-ventilated place.
4). Always store the product in a place that is inaccessible to children. The ideal storage
temperature is between 10 and 30°C.
5). We recommend using the original package for storage or covering the product with a suitable
cloth or enclosure to protect it against dust.