background image

Attention

Charge your Ebike

Ride & Maintance

Battery  &  Charge

1.Red indicator on the charger means charging,when it turns green ,please stop 

   charging your battery;

2

.

Do not expose to temperature -20

℃<

 or 

 35

℃,

Fully chare the battery and store  

   separately  i f not use for over 30 days.Fully charge it every 60 days,or the battery may 

   slf-discharge and be damaged.This damage is not covered by the Limited Warranty

;

3.Never expose your battery to damp environment or soak into water,never short 

   circuit the battery terminals, This damage is not covered by the Limited Warranty;

4.Charge with the original charger only;

5.Do not disassemble/punch battery pack.Do not place it in fire or drop from 

   high ,Avoid contacting with contacts;

6.Turn off Ebike’s power before charge it.Plug the charge port first then the  

   AC plug;

7.Do not cover any items on the charger during chargeing;

8.Pull out charge port before the AC plug;

9.Please keep battery outreach from children.

10.The capacity of Li-battery will decrease  when -10℃<;

11.Recycle or dispose of in accordance with local regulations.

Charging port is right beneth the 

saddle,covered by a rubber 

dust-free cover,uncover it,plug 

the charger into the port;cover 

the port again when charged.

If you want to charge your 

battery separately,roll out the 

power port ,release the seatpost 

clamp,pull out the seatpost 

battery,then repat the steps 

above.  

Press&hold power button for 3 sec,LCD shows sceen A,data shows as :sigle riding time- PAS class-speed-single range;

Press power button,LCD Shows sceen B,data shows as:total riding time-PAS class –Average speed-total range;

Press power button twice,LCD shows sceen C,data shows as:total riding time-max speed-voltage

1.Slide mode:press&hold DOWN button till         flicker,your Ebike will slide at a fixed speed of 6KM/H,release to quit.

2.Cruise mode:ride your Ebike to your wanted speed (must be over 7KM/H) ,then press&hold DOWN button for 3 sec to enter cruise mode,

   take break or press any button to quit.

3.LCD backlight:press&hold UP button to turn on backlight,press&hold UP button again to turn off.

4.PAS mode:press UP or DOWN button to choose PAS classes from 0~5. 

Slide mode

00:48

KM / H

VOL

28

5

.9

TTM

MAX

0036.8

KM

00:48

KM / H

ODO

18

5

.7

TTM

AVS

0008.4

KM

00:18

KM / H

DST

00

3

.0

TTM

0001.8

1 front mud fender

2 rear mud fender

3 reflecters

4 ring

5 lamp

Please mount accessories according to your needs.

Operate your Ebike

Touch&hold power button to turn off 

Accessory list

Up

Down

Power

LCD backlight

1.

Must with your helmet on and follow the local laws and 

   regulations

2.

Read this instruction carefully before riding a Ebike

3.

Start your ride with the 3rd  PAS class

4.

Keep the lamp on at night

5.

Fully check break system ,tire pressure ,and battery remain 

   before riding

6.

PLEASE do take front break FIRST

7.

Do not intense riding

8.

Do not ride into water over 15cm

9.

Replace the quick-wear parts(like break pad)in time

10.

Juveniles Pregnant Intoxicated are not allowed to ride Ebike

11.

Keep your Ebike away from damp, high temperature or   

     corrosive  environment

12.

Keep your Ebike away from sun-scorched and rain-drenched

13.

Check screws ,chain and other parts regularly

.

Reviews: