background image

4

7.   Query of continuous heating time – Press MODE button for 5 seconds, the display 

will show the total heating time for the previous day. 

   Press MODE button again for 5 seconds, the display will show the total heating time 

of the week. 

8.   Resume factory setting for P1 – P4 – To restore the factory setting of P1 to P4, 

press the UP button for 10 seconds (the current time and week will not be changed).

Factory setting: 
P1  morning 

6:00 AM 

20.5°C  69°F

P2  daytime 

8:00 AM 

20.5°C  69°F

P3  evening 

5:00 PM 

20.5°C  69°F

P4  night 

10:00 PM  17.5°C  62.5°F

   Complete restore of the digital control – Press DOWN button for 10 seconds and the 

program and time will be resumed to factory setting.

MaINteNaNCe

WARNINg: TO ReduCe The RIsk Of fIRe OR eleCTRIC shOCk, AlWAys 

sWITCh Off The uNIT ANd WAIT 10 MINuTes TO AllOW IT TO COOl befORe 

ATTeMPTINg ANy MAINTeNANCe OR CleANINg. 

It is recommended that the heater is cleaned periodically in order to avoid dust blocking 
the grill and allow proper ventilation.

CLeaNING

Wipe the unit with a soft damp cloth. Do not use abrasive cleaners or spray liquids on the 
unit surfaces.

Note: It is possible that the unit surface may discolour (yellow) over time, due to dust or 
cigarette smoke. This is normal and not a manufacturing defect.

storaGe

When the heater is not in use, the heater shall be stored in a dry location, away from 
possible damage. The power cord should be stored properly to avoid contact with hot or 
sharp objects.

warraNtY

The heating element is guaranteed for 10 years and all other components are guaranteed 
for one year from the date of purchase. If the unit should fail to operate correctly, call 
customer service at 1-800-459-4409 EST. We will, at our discretion, either repair or 
replace the unit. It will have to be returned to us freight prepaid and we will return the 
repaired or replaced unit to you, freight prepaid. The company’s sole obligation is to 
repair or replace the unit. This warranty is void if in the opinion of Quality Craft the unit 
has been tampered with, altered, misused, damaged, abused or used with the wrong 
power source. The warranty is for home use only and does not cover units used in 
commercial situations.

Imported by  

quality Craft

Laval, Quebec, Canada  H7S 2G7 
1-800-459-4409 (EST) 
www.qualitycraft.com

Made in China

Summary of Contents for MCVT120-150











Reviews: