511026 Rev. 07-01-19
163
Event Code
Message Text and Description
Details and Solution
4044
One of the Library tests failed because of a
source element or destination element is
currently not accessible.
Verify that a valid cartridge is located in the source
element and that the destination element is empty.
Check that all host applications are stopped.
4059
A drive that does not support encryption is
configured in a partition with encryption
enabled.
Replace Drive with a model of LTO Generation 4 or
higher or disable encryption for this partition.
4060
Connection to the KMIP server failed.
Verify username and password as well as all needed
SSL certificates needed for connecting to the KMIP
server. Verify that the KMIP server is reachable within
the network.
4061
Key not found on KMIP server.
Verify that the requested key is available on the KMIP
server. Check the KMIP server logs for additional
details.
4062
Key creation on KMIP server failed.
Check the KMIP server logs for additional details
about why key creation failed.
4063
KMIP configuration invalid.
Use the KMIP configuration wizard to verify the KMIP
configuration.
4064
KMIP feature not licensed.
Disable KMIP or install appropriate license for KMIP
feature.
4065
A tape alert flag was reported by a drive.
Power-cycle the drive, and verify whether the drive
reports the same Tape Alert. Use the library RMI to
save a drive dump and contact Technical Support
4067
Cleaning cartridge will soon be expired and
should be replaced.
Replace the cleaning cartridge.
4068
No cleaning cartridge found.
Auto cleaning is enabled, but the library contains no
labeled cleaning cartridge. Install a valid and labeled
cleaning cartridge into the library.
4071
Power supply fan failed.
Verify the power supply fan is spinning and ensure
there are no obstructions in the fan.
4072
No cleaning cartridge in partition available
for auto cleaning.
Auto cleaning is enabled, but the partition contains no
labeled cleaning cartridge. Install a valid and labeled
cleaning cartridge into the partition.
4073
Medium source element empty.
Check the source slot visually and rescan inventory.
Additionally, check for valid and readable barcode
label.
4074
Medium source element empty.
Check the source slot visually and rescan inventory.
Additionally, check for valid and readable barcode
label.
4075
Cartridge lost while extracting it from
slot/drive.
Check the source/destination element and ensure that
there are no obstructions in the pathway of the robot.