![background image](http://html2.mh-extra.com/html/qualstar/q40/q40_installation-and-operation-manual_3430585083.webp)
511026 Rev. 07-01-19
83
6.3.3 Configuring Event Notification Parameters
Use the
Configuration > Network Management > SMTP
page to enable SMTP (Simple Mail Transfer
Protocol) functionality and configure e-mail notification of library events. The library must have network
access to an SMTP server.
•
SMTP Enabled
– Check to enable SMTP. When checked, the remaining configurations are active.
•
Notification Level
– The types of events for which the library should send e-mail
•
Inactive
– No events are sent.
•
Critical
– Only critical events are sent.
•
+ Warnings
– Only critical and warning events are sent.
•
+ Configuration
– Only critical, warning, and configuration events are sent.
•
+ Information
– All events are sent.
•
SMTP Server
– Hostname or IP address of the SMTP server
•
Security
– Security protocol for accessing the SMTP server
•
None
•
SSL => SSL/TLS
•
TLS = STARTTLS
•
SMTP Port
– SMTP server port. The default port for the selected protocol will be selected. You can
choose one of the default ports or configure a custom port.
•
To Email Address
– The address to receive the reported events (for example
firstname.lastname@example.com). Only one email address can be configured.
•
Mailer Name
– Name of the sender of the e-mail
•
Email Subject
– Subject line for the e-mail message
•
Emailer Address
– Return address to use for the e-mail message
•
Authentication Required
– When checked, a username and password are required to access the
SMTP server.
•
Username
– User account for logging into the SMTP server when authentication is required
•
Password
– Password associated with the Username when authentication is required