![background image](http://html2.mh-extra.com/html/qualstar/xls-series/xls-series_technical-and-service-manual_3471239084.webp)
5.5
Performing Diagnostics
5-12
501610 Rev. 07-01-19
4.
From the Change Mode section, select
Logical Mode.
The Put into Logical Mode confirmation page opens, as shown in
Figure 5-10
.
Figure 5-10
Put into Logical Mode confirmation page
5.
Press
Yes
to confirm that you want to put the XLS in logical mode.
5.5
Performing Diagnostics
This section describes how to perform the following Run Diagnostic procedures from the
Service portlet:
•
Execute Command (see
Section 5.5.1
)
•
Audit Library (see
Section 5.5.2 on page 5-13
)
•
View SCSI Log (see
Section 5.5.3 on page 5-14
)
•
Service Utilities (see
Section 5.5.4 on page 5-15
Note:
For instructions for shutting down the library, see
Section 6.2 on page 6-1
.
5.5.1
Executing a Command
CAUTION
The Execute Command option was designed for Qualstar Technical
Support and Engineering use. To prevent operational problems with
the library, be sure to contact Qualstar Technical Support
before
attempting to execute any diagnostic commands on the XLS.
Summary of Contents for XLS Series
