Note: 1. Use only chargers compatible with the device and specified by the designated manufacturer.
Using an incompatible charger or one from an unknown manufacturer may cause the HotSpot HS2
PORTABLE WIRELESS (LTE) ROUTER to malfunction, fail, or even cause a fire. Such use voids all
warranties, whether express or implied, on the product. (2) Inside the box you will find the appropriate
USB cable to charge your device. If for some reason you do not have the cable provided by the
manufacturer, it is recommended to use one compatible with the following characteristics:
Output: 5.0Vdc 1A
2.4. Battery charge
Use only a standard SIM card (2FF), do not use 3FF (Micro SIM) or 4FF
(Nano SIM) cards unless you use a 2FF size adapter.
Input: 100-240 Vac 50/60 Hz 150 mA
If your PORTABLE WIRELESS ROUTER (LTE) HotSpot HS2 has not been
used for a long time, or the battery is completely depleted, the device
may not be able to turn on immediately after connecting the charger.
Charge the battery for a while before trying to turn on the equipment.
2.3. SIM Card Installation
8
2. Remove the battery
3. Put the SIM card in the
correct position
Note: Please do not use SIM/USIM cards that do not correspond to the port where the SIM/
USIM card will be placed, such as 3FF (Micro SIM) or 4FF (Nano SIM) cards, otherwise use a
2FF size adapter (Mini SIM)
A compatible SIM card and an active data plan must be used to enjoy internet service.
1. Remove the cover
2FF
