QUAN SHENG TG-007, User Manual

FUNCTION OPERATION AND DESCRIPTION

FUNCTION OPERATION AND DESCRIPTION

FUNCTION OPERATION AND DESCRIPTION（The following description is without

voice prompt.）

Squelch Level（SQL）——Menu No.0

1. In frequency or channel mode, press Menu+0, the LCD displays:
2. Press key Menu, the LCD displays:
3. Press key ▲ or ▼ to choose squelch level.There are 0-9 levels. 0: Lowest  9: Highest
4. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

This function can  turn on or off the monitor according to signal strength.

The operation steps are as follows:

!

NOTE

Too high squelch level may result in failing to receive in weak signals，Too low squelch level will
make it be disturbed by other signals.

⊙

!

NOTE

 In channel mode, this function is invalid.

⊙

Step Frequency（STEP）——Menu No.1

1. In frequency mode, press Menu+1, the LCD displays:
2. Press key Menu, the LCD displays:
3. Press key ▲ or ▼ to choose your desired step frequency.You can set 2.5/5.0/6.25/10.0/12.5/
   25.0KHz step frequency.
4. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

This function can choose the step frequency you want to set.

The operation steps are as follows:

FUNCTION OPERATION AND DESCRIPTION（The following description is without

voice prompt.）

Output Power（TXP）——Menu No.2

1. In frequency or channel mode, press Menu+2, the LCD displays:
2. Press key Menu, the LCD displays:
3. Press key Menu, and then press key ▲ or ▼ to choose.High: 5W，Low: 1W，
4. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

This function can choose High/Low output power.

The operation steps are as follows:

!

NOTE

Selecting high output power can improve the call quality, low output pow can reduce radiation and the 
battery capacity loss. In channel mode, press fast key "#" to switch between high and low output power.

⊙

!

NOTE

 If you choose OFF, the radio is not battery saving. In general, we suggest you choose 1:1.

⊙

Battery Saving（SAVE）——Menu No.3

1. In frequency or channel mode, press Menu+3, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose battery saving function. The LCD displays:                      
There are five kinds of mode. ①OFF ②1：1 ③1：2 ④1：3 ⑤1：4 Example: 1: 1(1s’working,1s’
battery saving) 1：2 (1s’working, 2s’battery saving) 
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

This function is mainly to save battery capacity when the radio is standby.

The operation steps are as follows:

0

SQL

5

0

SQL

6

1

STEP

25.0K

1

STEP

12.5K

2

TXP

HIGH

2

TXP

LOW

3

SAVE

OFF

3

SAVE

1

 23

24