QUAN SHENG TG-007, User Manual

FUNCTION OPERATION AND DESCRIPTION

FUNCTION OPERATION AND DESCRIPTION

FUNCTION OPERATION AND DESCRIPTION（The following description is without

voice prompt.）

Receiving DCS（R--DCS）——Menu No.10

1. In frequency mode, press Menu+10, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose. The LCD displays:  
   OFF: OFF
   R-DCS：D023N-D754N（Normal DCS）
   R-DCS：D023I-D754I（Inverse DCS）
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
    The LCD displays:

Using this function can set your privacy and prevent disturbance from others or match with the code 
of other radios.

The operation steps are as follows:

NOTE

!

 There are 208 groups of 
 normal and inverse DCS 
 in this radio.【see attached
 list (2)】This function is invalid
 in channel mode.

⊙

NOTE

!

There are 50 groups of CTCSS.【see attached list (1)】. This function is invalid in channel mode.

⊙

Receiving CTCSS（R--CTCS）——Menu No.11

1. In frequency mode, press Menu+11, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose from  67.0—254.1Hz.The LCD displays:
   CTCSS：67.0—254.1Hz，    OFF： OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
    The LCD displays: 

Using this function can set your privacy and prevent disturbance 
from others or match with the code of other radios.

The operation steps are as follows:

FUNCTION OPERATION AND DESCRIPTION（The following description is without

voice prompt.）

Keypad Sound Reminding（BEEP）——Menu No.8

1. In frequency or channel mode, press Menu+8, the LCD displays:

2. Press key Menu, and then press key ▲ or ▼ to choose ON, the LCD displays: 

3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

This function is to set the reminding sound. It will beep when you press keypad.

The operation steps are as follows:

Time-Out-Timer（TOT）—— M enu No.9

1. In frequency or channel mode, press Menu+9, the LCD displays: 

2. Press key Menu, and then press key ▲ or ▼ to choose 15s, The LCD displays:

3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

This function is to limit the calling time, the radio will stop transmitting and then launch voice if
 it transmits over setted time.

Example, if you want to set time limit for 15s. The operation steps are as follows:

8

BEEP  

OFF

8

BEEP  

 ON

9

TOT  

15

9

TOT  

 OFF

10

R-DCS  

OFF

10

R-DCS  

 D023N

400.875

136.225

DCS

11

R-CTCS  

OFF

11

R-CTCS

 67.0Hz

400.875

136.225

CT

 27

28