QUAN SHENG TG-007, User Manual

FUNCTION OPERATION AND DESCRIPTION

FUNCTION OPERATION AND DESCRIPTION

FUNCTION OPERATION AND DESCRIPTION（The following description is without

voice prompt.）

FUNCTION OPERATION AND DESCRIPTION（The following description is without

voice prompt.）

 53

54

1. ANI code can be set by PC programming only, you can input user-defined code in “ ID CODE” frame after click 

  “DTMF” and “Edit” in toolbar.  (Details please refer to Menu 15 in page 30)

 Note: 

The ANI code of each radio is

    independent.

    For example: 1st sub-radio: 10026  2nd sub-radio: 10088  3rd sub-radio: 22233  4th sub-radio: 88888

2. Set up parameters in each radio, in Menu 17 (Details in page 31), select one of fifteen groups ( 

Note: 

15 groups 

    signal code corresponds to DTMF code in software) and confirm it. In Menu 19, open up PTT-ID and notice the 

    delay time of code sending （Details in page 33）, then confirm it. In Menu 33, open up DTMF (Details in page 40) 

    and confirm it. In Menu 34, set the mute type (details in page 41) and confirm it.

3. Single Call   

    We only want to call individually even if when all radios are set in the same frequency.

    a. If you want to call 1st sub-radio, press and hold the PTT key, the radio will send PTT-ID automatically when 

       calling, then input the ID code “10026” of 1st sub-radio (

Note: 

8888810026) , the single call of 1st sub-radio 

       is successfully activated.

    b. If you don’t want to open PTT-ID, press and hold PTT key and input own AI code “88888” and AI code 

      “10026” of 1st sub-radio (

Note: 

8888810026), the single call of 1st sub-radio is successfully activated.

    c. You should press PTT key of 1st sub-radio to send the confirm message to main radio after the single call is

        activated, finally the two radios can work with each other. If the activate time is 5s, it mean you should resend

        the code to activate it when the radio standby more than 5s.You can set up the activate time in frame “1-15s

        launch overtime warning” in DTMF side tone after clicking “option box” and “Edit” in PC program software.

4. Group Call 

    For example: set two radios as a group call when many radios are in the same frequency.

    a. There is “ troop call code” in option box and choose code “A” (troop call code is universal character of ANI code) 

       after click “Edit” and “DTMF” in toolbar, finally write it into radio. (Troop call code can be mixed with ABCD*#) 

b. When you want to make a group call, press and hold PTT key of main radio to send the own PTT-ID code, then 

    input the first three same digits of 1st sub-radio and 2nd sub-radio and 2 digit group call code 100AA (

Note: 

    88888100AA) by keypad, the group call of 1st sub-radio and 2nd sub-radio is successfully activated.

c. If you don’t want to open PTT-ID, press and hold PTT key and input own AI code “88888”, then input the first 

   three same digits of 1st sub-radio and 2nd sub-radio and 2 digit group call code 100AA (

Note: 

88888100AA) by 

   keypad, the group call of 1st sub-radio and 2nd sub-radio is successfully activated. 

d. You should press PTT key of either 1st sub-radio or 2nd sub-radio to send the confirm message to main radio 

    after the group call is activated, finally the three radios can work with each other. If the activate time is 5s, it

    mean you should resend the code to activate it when the radio standby more than 5s.You can set up the activate

    time in frame “1-15s launch overtime warning” in DTMF side tone after clicking “option box” and “Edit” in

    PC program software. 

5. Troop Call

    For example: we can set the troop call when many radios are in the same frequency.

    a. There is “ troop call code” in option box and choose code “A” (troop call code is universal character of ANI

        code) after click “Edit” and “DTMF” in toolbar, finally write it into radio. (Troop call code can be mixed with 

        ABCD*#)  

    b. When you want to make a troop call, press and hold PTT key of main radio to send the own PTT-ID code, then

        input the five digits troop call code “AAAAA” (Note: 88888AAAAA),  the troop call is successfully activated.

    c. If you don’t want to open PTT-ID, press and hold PTT key and input own AI code “88888”,  then input the five

       digits troop call code “AAAAA” (Note: 88888AAAAA),  the troop call is successfully 

    d. You should press PTT key of any sub-radios to send the confirm message to main radio after the troop call is

        activated, finally all the radios can work with each other. If the activate time is 5s, it mean you should resend the 

        code to activate it when the radio standby more than 5s.You can set up the activate time in frame “1-15s launch