BASIC OPERATION
BASIC OPERATION
LCD DISPLAY
LCD ICON EXPLANATION
This symbol will appear when transmitting, it means transmitting CTCSS code.
This symbol will appear when transmitting, it means transmitting DCS code.
BASIC OPERATION
PTT Key
Transmitting/Receiving switch key: Press "PTT" to transmit and speak to microphone.
Release "PTT" to receive.
CALL Key (FM/Alarm)
Press it for a short time to turn on FM radio function.Operate it again to turn it off.
Press it for a long time to turn on Alarm function.Operate it again to turn it off.
MON Key (Jacklight/Monitor)
Press it for a short time to turn on Jacklight. Operate it again to turn it off.
Press it for a long time to turn on Monitor function.
Press Jacklight/Monitor key and turn the power on, to enter channel clone condition, it can copy one
radio's channel parameters to another one.
Cloning cable must be used to connect these two radios.
Band Key
UHF/VHF frequency band shift;
FM radio 65-75/76-108MHz shift;
In transmitting mode, press Band key to send 1750Hz call tone.
LCD Display
Display all the working condition.
In frequency mode, this symbol will appear, it means transmitting frequency equals
receiving frequency plus the offset frequency. It can set different frequencies.
In frequency mode, it will appear this symbol, it means transmitting frequency equals
receiving frequency minus the offset frequency. It can set different frequencies.
It means the transmitting and receiving frequencies are different at current channel.
It means it already set dual watch operation function.
VOX function
Reverse function
Narrow bandwidth
It represents the remaining battery. when the battery is almost used up,the frame
starts to flicker and it forbids to transmit.
It means the keypad is locked, pressing key #/Lock can unlock the keypad.
Low output power.
Current frequency and current menu setting.
Signal strength.
Channel number display
Frequency ending display
09
10
Summary of Contents for TG-007
Page 1: ...USER S MANUAL TG 007 0700...
