8
9
P-1
P-2
P-3
Dual watch operation
Priority scan
DCS
CTCSS
Transmit indicator
Function key
Signal
TX/RC signal indicator
VOX transmit function
Priority scan channel
Repeater shift direction
Reverse function
U-U, V-V, U-V mode
Keypad sound
H / M / L p o w e r
Frequency display
Scan function
Battery capacity indicator
Keypad lock
Battery capacity indicator (Full)
Note:
The rest capacity of the battery
The battery is exhausted, please
change a new battery or charge the
battery
Receive signal indicator
LCD DISPLAY
BASIC
OPERATION
Turn the Power/Volume knob clockwise to turn
the power on. When you turn it on, it will beep
and the channel will display on the LCD.
The LCD backlight shows. (P-1)
Turn Power/Volume knob counter-clockwise to
turn off the radio. (P-2)
Note:
Press and hold the Monitor button, then rotate
the Power/Volume knob to turn up and down the volume.
To make a call, press and hold the PTT switch, then
"
"
speak into the
microphone in normal speaking tone.
Hold the microphone approximately 1
.
5 inches (3-4cm)
from your lips.
Release PTT to receive signals
.
(P-3)
"
"
Summary of Contents for TG-UV2PLUS
Page 1: ...User s Manual...
