Chapter 3
23
KEMB-8100 & ATX-KLS0 Series User’s Manual
Jumper Settings
To ensure correct system configuration, the following section describes how to set
the jumpers to enable/disable or change functions. For jumper descriptions, please
refer to the table below
.
Table 2 Jumper List
Label
Function
JP1
Pin-9 Selection for COM3 & COM4
JP2
Keyboard Lock Selection
JP3
mPCIE LED Indicator Pin Header
JP4
Protected RTC Selection
JP5
mPCIE / mSATA Selection for MPCIE2 (Q170 models only)
JP6
Flash Descriptor Security Override Selection
JP7
AT / ATX Power Mode selection
JP8
ME F/W selection
JP9
mPCIE / mSATA Selection for MPCIE1 (Q170 models only)
JP12
PCIE Configuration Setting for PEG1 (Q170 models only)
JP13
Terminator Selection for COM1
JP14
Terminator Selection for COM2
JP15
Pin-9 Selection for COM1 & COM2
Table 3 JP1 Pin-9 Selection for COM3 & COM4
10
1
9
2
Jumper
Setting
Description
1
1-3 Short COM3, Pin-9 = +12V
3-5 Short COM3, Pin-9 = +5V
5-7 Short COM3, Pin-9 = +5V
7-9 Short COM3, Pin-9 = RI
2
2-4 Short COM4, Pin-9 = +12V
4-6 Short COM4, Pin-9 = +5V
6-8 Short COM4, Pin-9 = +5V
8-10 Short COM4, Pin-9 = RI
Pitch:2.54mm
Table 4 JP2 Keyboard Lock Selection
2
3
1
Jumper
Description
1-2 Short
Normal
2-3 Short
Keyboard Locked
Pitch:2.54mm
