MITX-V1K0 Series - User Guide, Rev. 1.0
// 19
3.2.
Scope of Delivery
The table below summarizes the features of the MITX-V1K0 Series motherboard.
Table 1: Component Main Data
System
Processor
AMD Embedded V-Series V1000 APU (TDP up to 54 W)
Memory
2x DDR4 SO-DIMM memory socket
Video
Display Interface
Configuration 1: 1x LVDS + 1x DP++ (on rear) + 2x DP (on rear)
Configuration2: 2x DP++ (on rear) + 2x DP (on rear)
Multiple Display
Quadruple
Audio
Audio Codec
Realtek ALC662
Audio Interface
2x Speaker-out (3 W)
1x Line-in (on rear)
2x Line-out (1x on rear, 1x by header)
2x Mic-in (1x on rear, 1x by header)
2x S/PDIF (1x on rear, 1x by header)
Network Connection
Ethernet
3x GbE LAN (RJ45 on rear, 2x Intel® I211-AT, 1x Intel® I210-AT)
Peripheral Connection
USB
2x USB 3.1 (Type A on rear)
5x USB 2.0 (2x Type A on rear, 3x by header)
Serial Port
2x RS232/422/485 (by header)
4x RS232 (by header)
Other I/Os
8-bit DIO (by header)
Storage & Expansion
Storage &
Expansion
1x SATA 3.0
1x mPCIe (full size, mixed w/ PCIe x1, USB 2.0)
1x M.2 Key B (type 2242/ 2280, mixed w/ USB 2.0/PCIe x2, NVMe support)
1x M.2 Key M (type 2280)
1x PCIe x16 (x8 signal)
2x SIM Cage (1x Micro type connected to M.2 Key B, 1x by wafer connected to mPCIe)
Power
Input Voltage
DC 12 V
Connector
2x4-pin ATX Connector
Firmware
BIOS
AMI uEFI BIOS w/ SPI Flash
Watchdog
Programmable WDT to generate system reset event
H/W Monitor
Voltages
