8
English
1.3 Memory Module Installation
The QBOX-2020 provide one 200pins SODIMM slot for DDR2 533MHz SDRAM memo-
ry modules and supports memory sizes up to 2GB.
These DIMM slots are inteded for memory modules.
DDR2 SO-DIMM Slot
200-pin, 1.8V
Installing Memory Module
1. Locate the DIMM1 SO-DIMM slot. Align the notch on the DIMM with the key on the
slot and insert the DIMM into the slot at 45-degree angle.
2. Push the DIMM gently forwards until the slot levers click and lock the DIMM in place.
Follow the same procedures to install the second DIMM if necessary.
3.
To uninstall the DIMM, flip the slot levers outwards and the DIMM will be released
instantly.
Important
You can barely see the golden finger if the DIMM is properly inserted in the DIMM slot.