FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
RX Backlight（RX-LED）——Menu No.30
1. In frequency or channel mode, press Menu+30, the LCD displays:
2. Press key Menu,and then press key ▲ or ▼ to choose, the LCD displays:
There are four selection: OFF：
YELLOW
GREEN
RED
3. After setting, press key Menu to confirm，and then press key PTT or Exit to standby.
You can choose the color of backlight when the radio is receiving.
The operation steps are as follows:
TX Backlight（TX-LED）——Menu No.31
1. In frequency or channel mode, press Menu+31, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
There are four options: OFF
YELLOW
GREEN
RED
3. After setting, press key Menu to confirm，and then press key PTT or Exit to standby.
You can choose the color of backlight when the radio is transmitting.
The operation steps are as follows:
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Alarm Mode （AL-MOD）——Menu No.32
1. In frequency or channel mode, press Menu+32, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
There are three options: SITE ALARM
TONE ALARM
CODE ALARM
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
This function can set tone alarm/code alarm/site alarm of the radio.
The operation steps are as follows:
Optional Signaling（OPTSIG）——Menu No.33
Set “OFF”, the DTMF shut down.
Set “DTMF”, the DTMF open.
RX-LED
OFF
30
30
RX-LED
RED
TX-LED
OFF
31
31
TX-LED
RED
AL-MOD
OFF
32
32
AL-MOD
TONE
39
40
Summary of Contents for TG-45UV
Page 1: ...USER S MANUAL...
