QuanSheng TG-45UV, User Manual

FUNCTION OPERATION AND DESCRIPTION

FUNCTION OPERATION AND DESCRIPTION

FUNCTION OPERATION AND DESCRIPTION（The following description is without

voice prompt.）

Tail Tone Elimination When Through Repeater（RP-SET）——Menu No.36

1. In frequency or channel mode, press Menu+36, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
    OFF: OFF  1, 2, 3, 4, 5……10 for prolong time.
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

This  function  is  that  when  the  radio  is  through  the  repeater,  the  transmitter  release  PTT  to  enter 
receiving condition.Because of the delay of the repeater, it will receive the noise from repeater to 
confirm if the repeater is working or not.

The operation steps are as follows:

!

NOTE

Pls close this function in normal use, lest affect your normal conversation.

⊙

Delay Time Of Tail Tone Elimination When Through Repeater
（RPT-RL）——Menu No.37

1. In frequency or channel mode, press Menu+37, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
    OFF: OFF  1, 2, 3, 4, 5……10 for prolong time.
3. After setting, press key Menu to confirm, and then
 press key PTT or Exit to standby.

This function is that when the radio use through repeater, the aim is to confirm if the repeater have 
transferred the signal. 

The operation steps are as follows:

!

NOTE

 Pls close this function in normal use, 
lest affect your normal conversation. 

⊙

FUNCTION OPERATION AND DESCRIPTION（The following description is without

voice prompt.）

Mute Mode Selection（SPMUTE）——Menu No.34

1. On channel or frequency mode, press MENU + 34, the LCD displays:
2. Press MENU, then pres“▲”or “▼”to choose, the LCD displays: 
    There are three options:
                                   QT: CTCSS conform to receive the call
                                   QT+DT: CTCSS and DTMF conform to receive the call
                                   QT*DT: CTCSS or DTMF conform to receive the call
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

This function can be set up receiving decoding mode for radio.

The operation steps are as follows:

Tail Tone Elimination（STE）——Menu No.35

1. In frequency or channel mode, press Menu+35, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose，the LCD displays:
   There are two options : ON
                                      OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.

To  eliminate  the  annoying  audio  generated  by  the  other  radio  after  the  transmitter  ends  the 
communication. 

The operation steps are as follows:

TDR-AB

OFF

34

34

TDR-AB

   A

STE

OFF

35

35

STE

   ON

RP-STE

OFF

36

36

RP-STE

   3

RPT-RL

OFF

37

37

RPT-RL

   3

 41

42