Quanshun Communication Technology Co., Ltd
Add: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China 362302
Tel: 86 595 86753355 Fax: 86 595 86758299
Receiving and Responding to a Group Call
Program the radio as a group member to receive any information from this group
calling.
1. LED light green.
2. Keep the radio 1-2feet (2.5-5cm) away from mouth.
If the radio program the “Free Channel Indication”, release PTT to get a short tone,
that means it is free channel and wait for your answer.
3. Press PTT to answer LED lingt red.
4. Talk to microphone after active the tone of allowing calling tone.
5. Release PTT to receive information.
6. Automatically over the calling if there is no operation with permitted period.
Transmitting an All Call
Program the radio with this function and transmit information to all users.
1. Rotate channel switch to desired channel from contact ID
2. Keep the radio 1-2 feet (2.5-5cm) away from mouth.
If the radio program the “Free Channel Indication”, release PTT to get a short tone,
that means it is free channel and wait for your answer.
3. Press PTT to answer LED lingt red.
4. Talk to microphone after active the tone of allowing calling tone. All the users on
this channel cannot answer the calling.
Receiving an All Call
All call is transmitting information to all the radios. Especially for releasing special
notice.
When receiving:
1. Radio sound a tone and LED light green.
2. Radio automatically over the calling if there is no operation with permitted period.
If the radio program the “Free Channel Indication”, release PTT to get a short tone,
that means it is free channel and wait for your answer.
NOTE:
When receiving all call, you change to another channel, then will stop
receiving the all calling. And during receiving, you cannot use any programmed keys
until calling is over.
Calls on Analog Channels
To transmit on an analog channel, hold down the PTT and speak into the microphone.
To receive, release the PTT key.
