Quanshun Communication Technology Co., Ltd
Add: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China 362302
Tel: 86 595 86753355 Fax: 86 595 86758299
Message
Send Pre-set Message
You can at most pre-set 50 pieces message.
1. Choose desired contact to send a pre-set message.
2. LED light red.
3. Two tons of “DiDi” means sending message successfully. A lower tone means no
message send.
Encryption
This function is only available for digital channel.
You can at most preset 16 list encryption, encrypted code(4 byte)by program
software and enable/disable this function.
Emergency Alarm
Press this programmed key to active emergency alarm.
Scan
Scan List
Create the scan list and allocate to single channel/contact list.
Through cycle scanning the listed channel/contact list to search the any
communication channel. It supports at most 250 list and 16 members for each list.
Scan
LED light red when scanning.
Two methods of scanning:
1.
Main Channels(by manual):
Scan all channel/contact groups from all scanning lists.
When scanning, your radio automatically starts from the last scanned channel,
contact list or starting scanning channel.
2.
Automatically manual:
Scanning start from the channel which be active automatically scanning.
Scan On/Off
1. Choose automatically scanning channel by press programmed key or rotate
channel switch.
2. When scanning active, LED light red and sound a confirm tone. Or stop scanning,
LED goes off and sound a negative tone.
Double Priority Channel
When radio enables this function, scan the priority channel and normal channel at
the every scanning with recycle scanning.
