7
7
2. Intended purpose
It is also recommended for use in case of increased require-
ments for the quality and safety of the power grid. The one-phase
AC voltage regulator is intended to supply safe, stable voltage
of three phases of 220/230V from a grid with poor quality.
The difference between QUANT regulators is the supply of uni-
form, without pulse emissions or failures, voltage to the load.
If there are dangerous surges or spikes in the mains at the in-
put, the advance protection, if necessary, switches off the load
and the regulator before the overvoltage pulse reaches the load.
Most dangerous situations are solved without switching off the
regulator so that the load receives a clean, filtered voltage for
phase 220V (230V), 50Hz, and the consumer will not notice
problems that could pose a danger to their electrical engineer-
ing.
The regulator is designed for continuous 24/7 operation in heat-
ed rooms at nominal power.
2.1. Storage and transportation regulations
Storage conditions of the regulator:
• temperature from 0°С to +40°С,
• up to 80% relative humidity at +25°C;
• do not throw.
The regulator in pack can be transported by any type
of the enclosed transport according to transportation
regulations for this type of transport.
QUANT-7
Automatic voltage regulator, one-phase
