BMC
C
ONFIGURATION
G
ROUP
3-51
SOL
Here, you can configure the Serial over LAN settings, select or change values for each attri-
bute and click the Save button to save any changes.
Figure 3-36.
SOL Settings Page
The fields of SOL Settings Page are explained below.
SSL
The Secure Socket Layer protocol was created by Netscape to ensure secure transactions
between web servers and browsers. The protocol uses a third party, a Certificate Authority
(CA), to identify one end or both end of the transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC. Using this, the device can be
accessed in a secured mode.
To open SSL Certificate Configuration page, click
Configuration > SSL
from the main
menu. There are three tabs on this page.
Upload SSL option is used to upload the certificate and private key file into the BMC.
Generate SSL option is used to generate the SSL certificate based on configuration
details.
Table 22: SOL Settings Page
I
TEM
D
ESCRIPTION
Enable Serial over LAN
Checked=Enabled; Unchecked=Disabled.
Channel Privilege Level Limit
Select the IPMI Serial over LAN minimum user privilege:
Administrator
Operator
User
Save
Use this button to save your settings.
Advanced SOL Settings
Use this button to go to advanced SOL page.
