BMC
M
AINTENANCE
G
ROUP
3-74
Step 4: upgrade firmware
Step 5: after Step 4, go to Step 2 and check if the setting is still preserved (if pre-
served then PASS else FAIL)
6. SSH
Step 1: Please go to add a new user and update the NEW SSH key.
Step 2: check if the user added SSH key updated
Step 3: go to Web-UI to check “SSH” to be preserved
Step 4: upgrade firmware
Step 5: after Step 4, go to Step 2 and check if the mode is still preserved (if preserved
then PASS else FAIL)
7. KVM
Step 1: Please modify the "Remote Session", "Mouse Mode" ,and "Virtual Media
Devices" setting by Web.
Step 2: check if the setting changed
Step 3: go to Web-UI to check “KVM” to be preserved
Step 4: upgrade firmware
Step 5: after Step 4, go to Step 2 and check if the setting is still preserved (if pre-
served then PASS else FAIL)
8. Services (supported from Grantley and Microserver platform)
Step 1: Please change the default value of each item by Web.
Step 2: check if the setting changed
Step 3: go to Web-UI to check “Services” to be preserved
Step 4: upgrade firmware
Step 5: after Step 4, go to Step 2 and check if the setting is still preserved (if pre-
served then PASS else FAIL)
Restore Factory Defaults
In MegaRAC GUI, this option is used to restore the factory defaults of the device firmware.
WARNING!
Please note that after entering restore factory widgets, other web pages and services will not
work. All open widgets will be closed automatically. The device will reset and reboot within a
few minutes.
!
