BMC
C
ONFIGURATION
G
ROUP
3-33
3. Enter the IP address of LDAP server in the
IP Address
field.
4. pecify the LDAP Port in the
Port
field.
5. Enter the
Search Base
. The Search base tells the LDAP server which part of the
external directory tree to search. The search base may be something equivalent to
the organization, group of external directory.
6. Click
Save
to save the settings.
7. Click
Cancel
to cancel the modified changes.
To add a new Role Group
8. In the LDAP Settings Page, select a blank row and click
Add Role Group
to open the
Add Role group Page as shown in the screenshot below.
Figure 3-22.
Add Role group Page
9. In the
Role Group Name
field, enter the name that identifies the role group.
10. In the
Role Group Search Base
field, enter the path from where the role group is
located to Base DN.
Note:
IP Address made of 4 numbers separated by dots as in 'xxx.xxx.xxx.xxx'.
Each Number ranges from 0 to 255.
First Number must not be 0.
Supports IPv4 Address format and IPv6 Address format.
Note:
Default Port is 389. For Secure connection, default port is 636.
Note:
Searchbase is a string of 4 to 63 alpha-numeric characters.
It must start with an alphabetical character.
Special Symbols like dot (.), comma (,), hyphen(?]), underscore (_), equal-to (=) are
allowed.
Example: ou=login,dc=domain,dc=com
Note:
Role Group Name is a string of 64 alpha-numeric characters.
Special symbols hyphen and underscore are allowed.
