BMC
C
ONFIGURATION
G
ROUP
3-42
Procedure:
1. In the Alert Policy Tab, select the slot for which you have to configure the Alert pol-
icy. That is, In the
Event Filter Entry Page
, if you have chosen Alert Policy number
as 4, you have to configure the 4th slot (the slot with Policy Number 4) in the Alert
Policy Tab.
2. Double click the slot and click
Modify
to open the
Add Alert Policy Entry Page
as
shown in the screenshot below.
Figure 3-28.
Add Alert Policy Entry Page
3.
Policy Entry #
is a read only field.
4. Select the
Policy Number
from the list.
5. In the
Policy Configuration
field, check
Enable
if you wish to enable the policy set-
tings.
6. In the
Policy Set
field, choose any of the Policy set from the list.
7. In the
Channel Number field
, choose particular channel from the available channel
list.
8. In the
Destination Selector field
, choose particular destination from the config-
ured destination list.
9. In the
Alert String field
, enable the check box if the Alert policy entry is Event Spe-
cific.
Destination Selector
To choose a particular destination from the configured destination list.
Note:
LAN Destination has to be configured - under
Configuration
->
PEF
->
LAN Destination
.
Modify
To modify the existing entries.
Delete
To delete Alert Policy list.
Note:
LAN Destination has to be configured under
Configuration
->
PEF
->
LAN Destination
. That
is if you select the number 4 for destination selector in Alert Policy Entry page, then you have
to configure the 4th slot (LAN Destination Number 4) in the LAN Destination tab.
Table 17: PEF Management - Alert Policy (Continued)
I
TEM
D
ESCRIPTION
