1. Safety instructions
1.1 Installation and commissioning
Place the unit on a plain, dry and clean place. Pay attention that the connecting cable is
untangled and free and that nothing is resting on it. For direct product cooling use the
cooling coil offered by the manufacturer only (optional item). It is imperative to provide
sufficient ventilation of the unit. The ventilation slots must remain free for sufficient
evacuation of heat. No objects may be placed under the unit!
The following safety measures must be observed:
Min. water temperature: -6 °C (with propylene glycol)
Max. water temperature: +30 °C
Max. ambient temperature: +32 °C
ATTENTION:
For cold water temperatures below 0 °C it is mandatory, to add
30 % of propylene glycol to the cooling water !
Note: There can be no ice bank building when using Glycol.
Keep the unit clean from any dirt, fiber etc.
Make sure to connect the unit to the required supply voltage
Protect the unit from moisture, no fluids may enter the electric parts
Observe the warning and safety information on the electrical components and in
this instruction manual
1.2 Safety information
The unit should be connected and operated by trained personnel. Adjustments,
maintenance and repairs should be performed by qualified personnel.
Correct function and reliability of operations of this unit can only be warranted, if during
operation and service the general common saftey precautions, as well as the specific
safety instructions described in this manual will be carefully observed.
Handling and treatment of the unit not according to the safety instructions required for
electrical appliances and the instruction in this document may result in severe bodily
harm which is not under the responsibility of the manufacturer. Injury and propert y
damage can accure through:
inappropriate operation
incorrect installation or operation
improper removal of the necessary protective cover or housing , wetting the electrical
parts
Opening of the unit during operation, which is prohibited
1.2.1 Impairment of safety
If the unit is damaged, it must be unplugged, set aside, marked to warn others against
using it, and a technician must be called before it is returned to operation. Using the unit
if it is damaged is unsafe and therefore stricktly prohibited.
Summary of Contents for ICECHILLY
Page 11: ......
