Mux:
Enable/disable bitfield.
Advanced Channel Menus
Setting the Sync Source
Although each channel receives its start pulse from the internal T
o
pulse, logically
the start pulse can be assigned such that the delay entered is relative to the T
o
pulse or any other channel pulse. This allows dependent events to link. The unit
will not allow a circular chain of sync sources that would result in a channel
triggering itself. The delay entered is relative to the selected sync source.
Sync Source:
Selects the channel sync source.
Setting Channel Gate Control
When the global gate is set (Chan Menu), the channel can then use the gate
input with independent behavior from other channels.
Gate:
Enables the GATE input for the channel by setting the
method of output control used with the gating function.
Logic:
Sets the logic level used with the gating function, either
active high or active low.
Pulse Inhibit method - the gate prevents the channel from being triggered by
the channel s trigger source pulse. If a pulse has already started when the gate
disables the channel, the pulse will continue normal output but will not restart on
the next trigger pulse.
Output Inhibit method - the gate leaves the base triggering alone and enables/
disables the output directly.
Gate Menu
Advanced
Timing
Parameters
Advanced
Timing
Paramete-
rs
Channel Gated Operation
Channel Gated Operation
Channel
Enable
Channel
Enable
Channel Enable
Channel Enable
SyncSource
Sync
Source
Gate Enable: Di sabled
Gate Enable: <method>
Gate Polari ty
G a te M o d e
G a te M o d e
G a te : D is a b le d
G a te : <m e tho d >
Thre s ho ld
P o la rity
