DT15 Dual Trigger Module
This module option allows the Gate input to double as a second trigger input.
For consistency, the enabling menu for this option is located under the Trigger
menu structure. Once you have enabled the trigger functionality of the unit, both
the Gate input and the Trig input can act as trigger inputs. However, in this
case the Gate input can still act as a system or channel gating signal as well as
a trigger signal.
If your unit has this option, the Trigger button will have two menus, one for
adjusting the Level and Edge for T and another for adjusting G . The T
designates the Trig input and the G designates the Gate input. The Level
for the Gate input can also be adjusted from the Gate menu.
Once you have enabled the triggering functionality of the unit, you can then
choose which channels will be triggered off of the Gate input and which chan-
nels will be triggered off of the Trig input. This selection can be done in the
secondary channel menus which are accessed by first pushing the yellow Func
button, then pushing the button of the channel of interest. The option is labeled
Trig Src: ; indicating the trigger source.
Also note that there is another secondary channel menu that allows you to
choose whether or not that particular channel is gated off of the Gate input,
while also allowing the option to trigger off of the Trig input or Gate input.
