Manual for Advance 6A/Advance 6B
Infrared Header (IrDA)
This connector supports wireless transmitting and receiving. If using this function, set
“UART 2 Mode” to HPSIR or ASKIR and configure the settings from the “INTEGRATED
PERIPHERALS” section of the BIOS.
Audio/Modem Riser Interface Connector (AMR)
The AMR Interface Connector is the interface between the mainboard and the Audio/Modem
Riser card. The connector provides all necessary signals which supports several different
configurations of audio and modem in the system, such as audio and modem on the Riser,
audio on the mainboard and modem on the Riser, or no audio with modem on the Riser Either
AMR (Audio/Modem Riser) card or MR (Modem Riser) card can be used on this system. This
software configurable AC’97 audio and modem system gives customers an advanced,
multimedia solution at an extremely low price.
Installation Instruction
VCC
NC
IRRX
GND
IRTX
VCC
AUX
GND
Left Audio Channel
Right Audio Channel
GND
Phone-In (from Modem)
Mono-Out (to Modem)
MODEM
CDLIN
Common
CD Right Channel
CD Left Channel
AMR