Quantum Design WinneX 3E Manual Download

Page: 3 / 24

Manual for WinneX 3E

Chapter 1

Multiple stereo input mixer.

Mono and stereo volume control.

Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack.

Advanced features

PCI 2.2 Specification Compliant.

Provides Trend ChipAw ayVirus

On Guard.

Supports Window s 95/98 softw are pow er-dow n.

Supports Wake-on-LAN and Wake-on-Modem.

Supports Keyboard Passw ord Pow er-on function.

Onboard I/O Winbond 83627HF supports system monitoring (monitors CPU and

system temperatures, system voltages, chassis intrusion and fan speed).

Supports management applications such as LDCM (LANDesk

Client Manager) or

QDI’s ManageEasy. (manufacturing option)

Provides onboard 3.3V regulator to support ATX pow er supply w ithout 3.3V output.

System status resumes after AC pow er failure.

Supports QDI’s innovations such as SpeedEasy, RecoveryEasy etc.

Protects the system BIOS from being attacked by severe virus such as CIH.

Supports Suspend to RAM.

BIOS

Licensed advanced AWARD BIOS, supports flash ROM w ith 4Mb memory size, plug

and play ready.

Supports IDE CD-ROM or SCSI boot up.

Green function

Supports ACPI (Advanced Configuration and Pow er Interface) and ODPM (OS

Directed Pow er Management).

Supports four ACPI pow er states: Full-on, Stop Grant, Suspend to RAM, and soft-off.

Ex pansion slots

3 PCI s lots.

1 AMR.

Summary of Contents for WinneX 3E

























Search results

Summary of Contents for WinneX 3E

Reviews:

Related manuals for WinneX 3E

Brands by name

Popular brands

Quantum Design WinneX 3E, Manual

Search results

Summary of Contents for WinneX 3E

Reviews:

Related manuals for WinneX 3E

Brands by name

Popular brands