Section 4C:
AC Charger
When you are finished with the unit, unplug the solar panel assembly, coil the cable on
the brackets and stow the assembly in a safe place. Switch off the inverter, then turn the main
switch to the off position. Wheel the unit to a safe, indoor location, and plug the AC charger
cord into a wall socket and plug the other end into the appropriate socket on the side of the base
unit. Close and latch the cabinet door. Note that the main switch should be OFF. The AC
charger will automatically maintain the batteries at the optimum voltage as long as it is plugged
in. There is no need for further intervention.
Please note that the AC charger will charge the batteries even if the
main switch is off, but in order to use the inverter or other power outlets, the
main switch MUST be switched to position #1!
The only other maintenance needed besides keeping the batteries charged is to keep the
faces of the solar panels clean to improve their efficiency.
15
Summary of Contents for 5000-60 TSW
Page 2: ......
Page 9: ...7 ...
Page 25: ...Cable A Cable B Cable C Cable E Cable D Cable F 23 ...
Page 26: ...Cable G Cable H Cable I 24 ...