v1.32
March 2014
63 of 90
7.4c To enter in your programming:
Add however many lines you choose after line 1. Each line must follow this format:
Address;Time Frame;Connection Timeout;Success Postponed Time;
Repeat Period;Low Energy Postponed Time;Format data;Notes
Please see
Appendix B
for a quick summary of settings.
Address:
Your Quantum GPS remote download address. Consists of 8 characters, and is printed
onto each collar.
Format:
XXXXXXXX
Example: 45AB1345
Default: 12312312
Time Frame:
The window of time that the software will attempt to download from the GPS. Outside of
this time frame the base station will not download data from this particular GPS.
Format:
hh:mm-hh:mm
Example: 03:00-15:00
Default: none
Connection Timeout:
Controls the duration of each download attempt. The software is only capable of
attempting to download data from one GPS at a time. During the connection timeout, no
other download attempt will occur even if it scheduled to do so. The GPS is only
available for a remote download once every 30 seconds; if the connection timeout is set
to less than 30 seconds you may never have any successful downloads.
Format:
s, m, h,
or
d
Example: 30s
Default: 5m
Success Postponed Time:
If the last download attempt of a specific unit was successful, this is the period of time
before it will attempt another download from that specific unit again. This setting only
applies when the previous download was 100% successful. A partial data download will
be subject to the
Repeat Period
not the
Success Postponed Time
. This value can be
Summary of Contents for 4000 Enhanced
Page 90: ...v1 32 March 2014 90 of 90...