quantum
M A S C H I N E N - G E R M A N Y
Safety
©
200
7
GB
Page 11
18 / 01 / 2008
Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32
Drilling machine
1.7.2
Protective cover of the pulleys
A protective cover for the belt pulleys is
mounted on the drilling head. A switch is
integrated in the protective cover which
monitors that the cover is closed.
INFORMATION
YOU CANNOT START THE MACHINE IF
THE PROTECTIVE COVER IS NOT
CLOSED.
Illustr.1-4: protective cover
1.7.3
Prohibition, warning and mandatory labels
INFORMATION
All warning labels must be legible. Check them regularly.
1.8
Safety check
Check the drilling machine at least once per shift. Inform the person responsible immediately of
any defect or change in the operating function.
Check all safety devices
•
at the beginning of each shift (with the machine stopped),
•
once a week (with the machine in operation),
•
after every maintenance and repair work.
Check that the prohibition, warning and information labels as well as the markings on the drilling
machine
•
are legible (clean them, if necessary),
•
are complete.
1.9
Personal protective equipment
For certain work, personal protective equipment is required, such as:
•
safety helmet,
•
protective glasses or face guard,
•
protective gloves,
•
safety shoes with steel caps,
•
ear protection.
Before starting work, make sure that the prescribed personal protective equipment is available
at the workplace.
CAUTION!
Dirty or eventually contaminated personal protective equipment might cause disease.
Clean your personal protective equipment
•
after each use,
•
regularly once a week.
protective cover
