Safety
quantum
M A S C H I N E N - G E R M A N Y
©
2
007
GB
Page 12
Drilling machine
B 13 / B14 / B16 / B20 / B25 / B32
Version 1.2.5
18 / 01 / 2008
Personal protective equipment for special work
Protect your face and your eyes: Wear a safety helmet with a face guard for every work, espe-
cially for the kind of work where your face and eyes are exposed to hazards.
Use protective gloves when lifting or handling pieces with sharp edges.
Wear safety shoes when fitting, dismanteling or transporting heavy components.
1.10
Safety during operation
In the description of work with and on the drilling machine we highlight the dangers specific to
that work.
WARNING!
Before activating the drilling machine, double check that this will
•
not endanger other people,
•
not cause damage to equipment.
Avoid unsafe working practice:
•
Make sure that your work does not endanger anyone.
•
The instructions of this manual must be observed strictly during assemby, operation, mainte-
nance and repair.
•
Do not work on the drilling machine, if your concentration is reduced, for example, because
you are taking medication.
•
Observe the regulations for the prevention of accidents issued by your association for the
prevention of accidents and safety in the workplace or other inspection authorities.
•
Inform the inspector of any danger or failure.
•
Stay at the drilling machine until all rotating parts have come to a halt.
•
Use the prescribed personal protective equipment. Make sure to wear a well-fitting work suit
and a hainet, if necessary.
•
Do not use protective gloves when drilling.
1.11
Safety during maintenance
Inform the operating staff on time of any repair and maintenance work.
Report all safety-relevant changes or performance details of the drilling machine.Document all
changes, have the operating manual changed accordingly and train the machine operators.
Switching-off and securing the drilling machine
Unplug the main switch before starting any maintenance or repair work.
All machine components and hazardous voltages are disconnected.Only the positions which are
marked with the pictogram in the margin are excluded. Attach a warning sign on the machine.
